How to Clean a Commercial Dishwasher: Daily, Weekly and Monthly Guide
Published: 26-10-2026
A clean dishwasher washes better, breaks down less and lasts longer. Most of the faults engineers get called out for, from cloudy glasses to blocked drains, start with a dirty filter, a blocked spray arm or a build-up of limescale.
The good news is that keeping on top of it only takes a few minutes a day. This guide gives you a simple routine to follow, plus a few habits that get better results from every wash.
Every Day: At the End of Service
- Clear out food debris from inside the machine, including the filters, waste traps and the top and bottom spray arms.
- Remove and rinse the spray arms and filters so nothing is left to block them tomorrow.
- Clean the inside with a soft, non-abrasive brush and warm water or a non-foaming cleaner. If your machine has a self-clean cycle, use it.
- Pay attention to the door seals, corners and hard-to-reach areas, where food and grease collect.
- Wipe down the outside with a damp cloth.
- Put everything back, run an empty cycle to clear any cleaning residue, then drain the machine fully.
Important: don't use soap-based products to clean the inside of your dishwasher. Any residue left behind can cause foaming and poor wash results.
Every Week
- Check the wash and rinse arms for blockages. If a jet is blocked, take the arm out and clear it carefully with a straightened paperclip or similar tool.
- Descale if you're in a hard water area. Limescale affects heating and water flow. Use a commercial descaler that's compatible with your machine, and follow the manufacturer's instructions.
- Check your detergent and rinse aid levels, so the machine never runs a cycle without them.
Every Month
- Inspect the door seals and gaskets for wear, cracks or damage, and replace them promptly to prevent leaks.
- Check the detergent and rinse aid dispensers are working and aren't blocked.
- Keep an eye on wash and rinse temperatures. If they're drifting, ask an engineer to check and recalibrate the thermostat, because the right temperature is essential for safe, hygienic results.
Twice a Year: A Professional Service
Even with a good in-house routine, have an engineer service your dishwasher or glasswasher every six months. They can check the electrical components, recalibrate the machine and spot worn parts before they fail, which is far cheaper than an emergency callout in the middle of service.
How Often Should You Clean a Commercial Dishwasher?
Treat the routine above as a starting point. How often your machine needs cleaning depends on how many covers you do, the type of food you serve, how hard your water is, and any requirements from your local environmental health team. A busy kitchen serving greasy food may need a deeper clean more often than once a week.
Can You Use Bleach in a Commercial Dishwasher?
It's best not to, unless your machine's manufacturer says it's safe. Bleach can damage internal components and discolour some materials. If you're unsure about any cleaning product, check the manufacturer's guidelines first.
Does Your Dishwasher Need Descaling?
In hard water areas, limescale is one of the most common problems in commercial kitchens. It makes the machine work harder, pushes up energy costs, and leaves chalky spots and cloudy marks on dishes and glasses.
Regular descaling keeps your dishwasher efficient and extends its life. A water softener reduces how much limescale builds up in the first place. For more, see our guide to commercial dishwasher salt, detergent and descaling.
Get Better Results from Every Wash
Cleaning the machine is only half the job. These habits make a big difference to wash results, running costs and wear and tear:
- Choose the right cycle. Use lighter cycles for glassware and lightly soiled items, and save heavier cycles for pots, pans and heavily soiled dishes. It saves water and energy and puts less strain on the machine.
- Use good detergent and rinse aid in the right amounts. Rinse aid helps water run off cleanly, so items dry faster and need less polishing.
- Load properly. Don't overload, and make sure water can reach every surface. Our guide to dishwasher racks and trays explains how.
- Train your staff. A simple loading and cleaning chart on the wall next to the dishwasher helps everyone do it the same way, every shift.
- Keep a maintenance log. Record cleaning, servicing and repairs. It helps your engineer track down problems faster, and it's useful evidence if an Environmental Health Officer asks about your cleaning routine.
When to Call an Engineer
Regular cleaning prevents a lot of problems, but not all of them. If you notice unusual noises, leaks, or dishes that keep coming out dirty even after a clean, it's time to call in a professional.
GA Commercial's engineers repair and service all makes and models of commercial dishwashers, glasswashers, utensil washers and rack conveyors. Book a repair or service and we'll get your machine back to full performance.
Still stuck? Our commonly asked commercial dishwasher questions may already have the answer.