Commercial Dishwasher Salt, Detergent & Rinse Aid Explained

Published: 26-10-2026

Spotless plates and clear glasses don't just depend on the dishwasher. They depend on what goes into it. Salt, detergent and rinse aid each do a different job, and if one is missing or wrong, wash results suffer and the machine wears out faster.

This guide explains what each one does, which machines need salt, how to descale safely, and what to look for in an eco-friendly detergent.

 

Salt, Detergent and Rinse Aid: Who Does What

The three are often confused, but they're not interchangeable:

  • Salt softens the water. It isn't a cleaning agent.
  • Detergent cleans. It removes grease, food and stains.
  • Rinse aid finishes. It helps items dry quickly without streaks or spots.

You need all three working together for consistent results.

 

What Is Commercial Dishwasher Salt?

Commercial dishwasher salt is high-purity sodium chloride made for dishwashers with a built-in water softener. Unlike table salt, it contains no additives or anti-caking agents that could damage the machine.

Its job is to regenerate the softener. Hard water contains calcium and magnesium; the softener swaps these for sodium (a process called ion exchange) before the water reaches your dishes. Without salt, the softener can't regenerate, and the machine ends up washing with untreated hard water.

 

Does Every Commercial Dishwasher Need Salt?

No. It depends on how your water is treated.

Machines that need salt: any dishwasher or glasswasher with a built-in water softener. These are common in pubs, bars, restaurants, cafes, hotels and venues in hard water areas, and many undercounter models have one as standard or as an option.

Set-ups that may not need it: sites with an external water softener on the supply, a reverse osmosis system, or a machine designed for a soft water area. Whether you need salt depends on your water quality and how your system is set up, so check with your supplier or engineer if you're unsure.

 

How Much Salt Does a Commercial Dishwasher Use?

It depends on your water hardness, how often the machine runs, its size and the capacity of the softener. In a busy kitchen, salt may need topping up weekly or even daily. Most machines have a salt indicator light to tell staff when it's low.

Only use commercial dishwasher salt, usually supplied as coarse granules or tablets. Table or cooking salt can block the softener, corrode internal parts and stop the softener working properly.

 

What Happens if You Don't Use Salt?

In a machine that needs it, skipping salt causes problems quickly:

  • Limescale builds up on heating elements, pipes and spray arms, reducing performance and leading to costly repairs.
  • Glasses and plates come out cloudy, dull or streaky, which matters in any venue where presentation counts.
  • You use more detergent, because hard water makes it less effective.
  • Energy bills rise. Limescale insulates the heating elements, so the machine works harder and cycles take longer.
  • The machine wears out sooner. Ongoing scale build-up can lead to premature failure.


Commercial Dishwasher Detergent

Commercial detergents are made to break down food, emulsify grease and lift stains from crockery, cutlery and glassware. They come as liquids, powders or tablets, and liquid detergents are usually fed by an automatic dosing system.

A good commercial detergent:

  • removes food and grease, using alkaline ingredients that break fats down
  • helps control limescale, using ingredients called sequestrants that tie up hard water minerals
  • protects the machine, with corrosion inhibitors that look after internal parts


Commercial Rinse Aid

Rinse aid is added at the end of the cycle. It lowers the surface tension of the water, so it sheets off surfaces instead of forming droplets. That means:

  • no spots or streaks, especially on glassware
  • faster drying, so less hand-drying and polishing between services
  • clearer, brighter glasses
  • less moisture left behind, which helps prevent odours in the machine


Choosing the Right Detergent and Rinse Aid

Consider:

  • Your water hardness. Hard water may need specialist products, a softener, or both.
  • How busy you are. High-volume kitchens get better value from concentrated formulas.
  • Your machine. Use products designed for commercial dishwashers, and dose them as the manufacturer recommends. Too much or too little affects results and can damage the machine.


Eco-Friendly Detergents: What to Look for

Biodegradable detergents can clean just as effectively while reducing the impact on wastewater. If you're considering a switch, look for:

  1. Plant-based ingredients, without phosphates or harsh chemicals.
  2. Biodegradable formulas with low aquatic toxicity.
  3. Low-foaming products designed for commercial machines and automatic dosing, that work in hard and soft water.
  4. Built-in limescale protection, using biodegradable softening agents.
  5. Recognised eco-labels, such as the EU Ecolabel or Nordic Swan.
  6. Concentrated formats, which cut packaging and usually give a better cost per wash.

When you switch, check the product suits your machine. You may need your rinse aid or softener settings adjusting, and an engineer can do this at your next service.


How to Descale a Commercial Dishwasher

In hard water areas, limescale blocks spray arms, coats heating elements and leaves dishes spotty or streaked. Regular descaling keeps the machine efficient and helps it last.

  1. Use a commercial descaler designed for your machine. Avoid household remedies, which may not be suitable for commercial components.
  2. Follow the manufacturer's instructions. Some machines need a specific method or product.
  3. Rinse thoroughly afterwards. Run fresh water cycles so no descaler is left behind.
  4. Descale as often as your water needs. In hard water areas this may be every month or two; your engineer can advise.

Descaling treats the problem, but prevention is better. A water softener removes the minerals that cause limescale in the first place. It's an upfront cost, but it usually pays back through lower energy bills, less detergent and fewer repairs.


Best Practice for Salt and Chemicals

  • Check salt levels regularly, especially in busy periods.
  • Top up when the machine indicates low salt.
  • Make sure the salt cap is sealed tightly after refilling.
  • Keep detergent and rinse aid topped up, and check the dosing system is working.
  • Combine all of this with regular cleaning, descaling and servicing.

GA Commercial supplies granular and tablet commercial dishwasher salt, detergents, rinse aids and descalers for commercial warewashing. If you're not sure what your machine needs, get in touch and we'll help.