DC SGP40IS Standard Range 400mm Basket Frontloading Commercial Glasswasher with Integral Water Softener, 18 Pint Capacity

Making light work of the smaller commercial environment the DC SGP40IS compact glasswasher cleans up to 18 pints in just two minutes. With extra height cavity to accommodate specialist pint and cocktail glasses - fitted with an integral water softener.

Easy and intuitive operation and maintenance controls combined with outstanding value for money make this one of our best sellers.

DC SGP40IS Standard Range Glasswasher Features:

• Integral Softener Included
• Increased Load height to accept Taller Glasses (300mm)
• Energy saving wash pump
• Low water usage
• Easy clean filters
• Door: Double skinned stainless steel cabinet and door
• Removable anti-block wash and rinse arms
• Integral detergent and rinse aid dosing units
• Simple, intuitive controls
• Supplied with 2 glass baskets
• Extra height cavity to accomodate specialist pint and cocktail glasses

Do I Need a Drain Pump?
This appliance has a drain height of 120mm. If your waste connection is above that height you may want to consider a Drain Pump. A Drain Pump allows you to pump the waste into your outlet rather than letting gravity do the work for you. Some facilities can incorporate a gravity drain by elevating the machine on a stand; this can often remove the need for a drain pump providing the waste connection is below the appliance's drain.

Do I Need an Integral Softener?
In hard water areas we think it is imperative to at least consider a integral water softener for your appliance. From experience, we have found that Limescale is the biggest and most frequent problem our customers encounter. This is due to the high mineral content in the hard water being used by the appliance and over time, Limescale builds to the point of seizing operation. Softeners remove the mineral content to provide a clean water supply and a recharged with Salt.
NEW - IS / Integral Softeners are now fitted with auto-regeneration on start-up and a counter to enable users to adjust the frequency of auto-regeneration depending on their water hardness. This will help with customers who didn't realise they had to regenerate their built-in softeners these new features will eliminate this problem.